So, for my first real post, i figured i may as well post my standard carry knife that i use for just about everything. This one is the third knife i made, many many moons ago. It is forged from a tractor mower blade. I'm not sure why i put the bevel on the back of the blade, i believe it was something to do with making a finer point, because its quite a thick blade. Its got a convex grind, with a slight secondary convex bevel in the picture, though thats gone now, was a function of field sharpening with a small axe stone. I handle timber is a pacific rim hardwood called Merbau, and the pins are recycled 4.5mm steel nails. I hope you guys like it!