After my success with making a steel for my flint and steel kit I thought I'd have a go at making some basic knapping tools.
Did a bit of research last night and this is what I came up with.



The top two need a bit of fettling still, the bars are from a 110v plug I had spare, so will need filing to shape (they split when hammered)
Next is a shear just a bit of flattened out 15mm copper tube (they also make good little filler spatulas for two pack filler )
Bottom of the pic is a bopper. This is made from 15mm copper pipe and a push fit end cap, to give it some weight I rolled up a sausage of lead flashing so it would fit in the pipe, then I cut the roll into 10 to 15mm long pieces dropping them in one at a time and rammed them each home with a 10mm steel bar and the help of a lump hammer, until nearly half full.
It will probably do double duty as a priest when fishing. ( the lead is packed so tight it does not slide or rattle )

Cheers for looking in,

Rob.