Made this today .
Cheers
AL
Made this today .
Cheers
AL
Nice little leather pouch for the stand & pegs too
like the though that went into using the cut out bit as a burner/ hexi block stand nice one
[
Yes - nice re-designation of an offcut. After all it would be a waste of a nice shiny bit of s/s otherwise!
If you stretch out both arms to represent all time on earth, then with one stroke of a nail file you could eradicate all human history, and 98 per cent of all human history was spent in the stone age.
Nice work. I like it a lot
Excellent Al - got a couple of these (after you got one) and have used it unaltered for a fire base for making charcloth or a stand for the icebucket woodstove I made. Great stand but for the charcloth had to lift off the tin a couple of times to feed it so you've made that easier next time. Also like the use of the shiny offcut - maybe that's another posting in the lines of the 3m paracord posting - "what would you use the shiny offcut for" (onlyyyyyy jokingggggg)
nice work, mate.
Thanks Guys Im glad ye like it . It works great I just took it down to the plot and made a cuppa coffee with it useing some wood from the workshop . Fired right up and dident need much to boil the kettle.
Havent tried useing the meths burner or the Hexie's yet but will do soon.
the 2 tent pegs were cut then the off cuts I bent so they would hold the stove from falling over when useing it in the woods or the river bank.
Thanks for lookin
Cheers
AL
Last edited by AL...; 10-06-2012 at 08:52 PM.