Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Cleaning a kuska

  1. #1
    Tramp hoppinmad's Avatar
    Join Date
    Nov 2010
    Location
    South Wales
    Posts
    30

    Cleaning a kuska

    Hi All,
    I have a burch burl kuska i bought over the internet from Finland [still not allowed to play with knves till I learn how to use a spork ]
    Well on my last outing I was using said kuska to drink red wine which was left in overnight and now has stained the inside of the Kuska
    In the care instructions it says not to use very hot water or washing up liquid, but to scour with sand or dirt to clean
    I have tried to scour but with no success.. does any one have any ideas on how to clean this kuksa
    Thanks in advance
    regards
    stu

  2. #2
    Moderator & Poshcrafter™ Martin's Avatar
    Join Date
    Nov 2010
    Location
    Cornwall
    Posts
    3,260
    Hi Stu,

    Whilst I totally understand your desire to get your kuksa nice and clean, I don't think you'll get much sympathy on here for cleaning your kit. I get roundly jeered at whenever I turn up with my freshly cleaned billies.

    In all seriousness, it's stained not dirty isn't it? The only thing you could try may be to bleach but that would probably leave a taint to the taste. Why not leave it as it is and call it patina?? Failing that, you would have to remove material until you got down past the stained layer of timber but that sounds a bit drastic to me.

    Hope this helps, although I doubt it.

    Martin
    Sometimes your joy is the source of your smile, but sometimes your smile can be the source of your joy.

  3. #3
    Tramp hoppinmad's Avatar
    Join Date
    Nov 2010
    Location
    South Wales
    Posts
    30
    Hi Martin,
    I think your right..call it patina and live with it, i would not like to get to drastic for fear of ruining the surface further!
    thanks
    stu

  4. #4
    NaturalBushcraft Founder Ashley Cawley's Avatar
    Join Date
    Nov 2010
    Location
    Cornwall, UK
    Posts
    2,803

    Thumbs up

    That's a good question Stu, I've got a similar Kuksa, this is mine when it was relatively new, so the inside isn't stained there:



    Now it has been used a lot more the inside is a lovely, dark/deep red and I love it! I know it's stained with everything I've had in there; from tea, coffee, whiskey, cider, meade, port everything under the sun and it adds character in my opinion.

    When I'm done at the end of the day I wash it clean of any residue, just using cold water (no soap or abrasives). I really like the colours/look on the outside & the inside, my only minor complaint is that it's not a little bigger.

    At home on rare occasions I will wash the whole thing inside and out again with just cold-water, rubbing with hands and then after it has dried naturally (use cloth and leave it to dry, don't heat on a heater or airing-cupboard!) I might give it a gentle wipe with a bit of linseed oil on the outside of the cup.
    Ashley Cawley

    Youtube | Forum | Twitter | Flickr
    Leave No Trace

  5. #5
    Tramp hoppinmad's Avatar
    Join Date
    Nov 2010
    Location
    South Wales
    Posts
    30
    Hi Ash,
    Thats a really nice looking kuska, I like the carving [pyrograph] of the owl..did you do that yourself or did it come like that?
    I think the stain on my kuska is slowly growing on me...its just that it is the first kuska i have owned...and i thought that I may have ruined it..but if you and martin have staines then it must common to all kuska's
    When I first saw kuska's I thought that they were a bit expensive for what in effect is a wooden cup...but having used it a few times camping etc i really appriciate and enjoy drinking out of it..and it makes a good talking point when sharing a wee dram with friends
    Stu

  6. #6
    NaturalBushcraft Founder Ashley Cawley's Avatar
    Join Date
    Nov 2010
    Location
    Cornwall, UK
    Posts
    2,803
    I didn't do the owl myself no, it came like that Mine was a Christmas present from the Mrs, I think she got it off ebay. Stains are perfectly normal
    Ashley Cawley

    Youtube | Forum | Twitter | Flickr
    Leave No Trace

  7. #7
    Natural Born Bushcrafter MikeWilkinson's Avatar
    Join Date
    Nov 2010
    Location
    Blackrod, Bolton
    Posts
    898
    If you can't live with the stains, make yourself a new one!

    google Jons Bushcraft and look at his articles, has a great tutorial on there on how to do it.

    or even better, here is the link straight to it


    http://www.jonsbushcraft.com/Kuksa%20tutorial.htm


    I've not tried it yet, need to get myself a crook knife and find a nice birch round, but will be giving it a go after xmas.

  8. #8
    Tramp hoppinmad's Avatar
    Join Date
    Nov 2010
    Location
    South Wales
    Posts
    30
    Hi Mike,
    That is a really good tutorial!!..my carving skill are not up to that standard yet, but i might give it a go at the next moot
    Stu

  9. #9
    Natural Born Bushcrafter MikeWilkinson's Avatar
    Join Date
    Nov 2010
    Location
    Blackrod, Bolton
    Posts
    898
    My skills are no way near that good either, but hey i'm of the ilk to give it a go anyway, even if the finished article is a little rough round the edges or a bit wonky, you made it, its yours, and there won't be one like it anywhere else... ... In saying that though, I'm using the same principles in the tutorial to carve spoons, just made my first and starting on a second - without a crook knife I might add - once I get fairly good at them I'll have a go at a kuska, with a crook knife maybe, or I might just burn the bowl out, dunno yet?!

    I like his dish/bowl tutorial as well, quite a talented young chap!

  10. #10
    Natural Born Bushcrafter MikeWilkinson's Avatar
    Join Date
    Nov 2010
    Location
    Blackrod, Bolton
    Posts
    898

    My first attempt.

    Click image for larger version. 

Name:	DSCF3845.jpg 
Views:	178 
Size:	89.9 KB 
ID:	19 Click image for larger version. 

Name:	DSCF3844.jpg 
Views:	179 
Size:	87.2 KB 
ID:	20 Click image for larger version. 

Name:	DSCF3846.jpg 
Views:	169 
Size:	87.2 KB 
ID:	21

    Well, seeing as I mentioned it, thought I'd have a go at making a small one. I haven't got a crook knife, so had to scrape and gouge out the inside with my knife, bloody hard work I can tell you. Think I need to invest in a crook knife for the next attempt.

    It is not quite finished yet, needs a few touches here and there and a final sanding, considering I don't really do carving I'm pretty happy with it and thats all that counts I suppose.

    Just hope it doesn't crack as it dries out!

    I've put a my first spoon attempt in the photo too.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •